May 31, 2010
Top-Line growth despite the recession could be registered during this past year in the so-called non-manufacturing applications of image processing and machine vision. A presentation of the first results – still preliminary – of the annual market study conducted by the EMVA, given by Director of Market Research Andreas Breyer at the business conference of the association in Istanbul this past April, has shown a respectable increase from about 12% to about 19% of total sales of European machine vision by these sectors in 2009. This number, a fifth of the industry´s sales result after all, is even more remarkable considering that the market data is gained predominantly in the area of “industrial” machine vision. Companies being active mainly in areas such as life science, security, surveillance, document management as well as ITS, logistics and military, are not even covered by the EMVA survey. This is based in the historical roots of the association. Both, the European association EMVA as well as the German VDMA sub-group “Industrielle Bildverarbeitung” (Industrial Vision/Machine Vision) have their roots in the “traditional” markets of factory floor quality control automation that started about 20 years ago. These “seeing machines” are today an integral part of modern production technology. Even more: the major part of automated processes for the manufacturing of all kind of products – from toothbrushes up to complete automobiles – would not even be feasible without the vision technologies. The golden days of annual strong double-digit growth, however, have come to an end. The American industry association AIA has forecasted a very moderate growth of 3% for 2010; their European counterparts still expect an increase in turnover at about 11% for this year. Beyond the traditional feeding grounds of machine vision, however, the world moves at a whole different pace. Allow me to hazard the prediction, that we will see imaging technologies in every aspect of our daily life ten years from now. Small airborne robots will be used to automatically visually detect structural damages on buildings from above, guided by robot vision in the first place. Vehicle flow on the main traffic arteries will be steered by individual on-board cameras based on data from the higher-level traffic surveillance camera infrastructure. Our vacation planning will be done at 3D monitors within the augmented reality environment of the trip´s destination having been fully digitized by 3D scanners. Miniaturized cameras regularly circle around inside our body and send out warning messages as soon as they detect something out of the order. Utopia? Maybe so. Maybe it will take ten years instead of twenty, but maybe this vision of the future is not yet even close to what will really evolve. Already today a vacuum cleaner can be obtained at Amazon for a mere 300 Euros that is guided through my place by vision. My cell phone is able to identify my vis-à-vis by face recognition, find him in my address data base and spare me the embarrassment of having to reply to a joyful salutation at the trade show booth with a sheepish “Sorry, what was your name again?”.
Gabriele Jansen
Leave a Comment » | 
Viewpoint | Tagged: 3D monitors, AIA, airborne robots, EMVA, EMVA survey, face recognition, Image processing, ITS, life science, Machine vision, market study, predicition, security, surveillance, vacuum cleaner, VDMA, vision technologies | 
Permalink
Posted by stephanienickl
March 3, 2010
The 8th EMVA European Machine Vision Conference is getting closer: the conference will take place on April 16 and 17, 2010, in Istanbul, Turkey. Business leaders of the machine vision industry from 20 countries are expected to participate.
We are pleased to present at the conference Mark McGregor, a top-notch speaker offering a session on leadership. In high demand around the globe, Mark has a proven track record of inspiring business executives with his views on motivation, high performance teams, the psychology of winning and many other topics. Since 1999, he has been ranked as one of the top speakers at the St. Gallen Business School and the St. Gallen Management Program. I myself attended one of Marks seminars on leadership and look very much forward to hear him again in Istanbul.
Mark’s approach is unique: His former career as a professional ice hockey player and coach in Canada, Germany and Switzerland enables him to transfer insights from high-performance teams in sports to those in the world of business.
The leadership session is not the only highlight of the conference, however. Once again, the EMVA Conference 2010 focuses on the topics that matter. Here is a quick overview:
Machine Vision in Turkey: Turkey is dynamically developing as a manufacturing base. Top speakers will give overviews of the Turkish economy, the Turkish machine vision industry and machine vision use in Turkey’s rapidly growing manufacturing sector.
Machine Vision Markets: Get the latest updates on machine vision market developments in Europe, North America and Japan.
Research Funding Opportunities in Europe: Find out what is in it for the machine vision industry at our panel discussion.
Technology Trends: Augmented Reality. Service Robotics. Two presentations provide a technology update and identify potentials for the machine vision industry.
I hope this short summary watered your mouths and I will see all of you in Istanbul in April. Of course the networking will be great as always, and the pre-conference reception, the Friday evening event and the sightseeing tour on Saturday afternoon will make for a brilliant framework. More information can be found at www.emva.org.
Gabriele Jansen
Leave a Comment » | Image processing, Imaging, Machine vision, Vision, Vision Business, Vision Marketing, Vision Markets | Tagged: business conference, EMVA, Istanbul, Machine vision, machine vision markets, Mark McGregor, research funding, vision leader, vision networking, vision professional | Permalink
Posted by gabrielejansen
November 19, 2009
The financial crisis hits the super-rich as well, says Forbes 400, the ranking list of the 400 wealthiest Americans which was updated this autumn. Within one year they lost a combined $300 billion, about 205 billion Euros. Number 1 on the list is Bill Gates, the Microsoft founder, with an estimated net worth of $50 billion. He had to swallow a loss of about $7 billion. Hit even harder was the investor Warren Buffet who ranks second. According to the American business publication Forbes he lost $10 billion.
But in these difficult times when announcing deficits are on the daily agenda, it is much more interesting to take a look at the winner: Marc Zuckerberg. Within one year the founder of Facebook climbed up from place 321 to place 158 of the Forbes 400. Originally the 25-year-old entrepreneur launched Facebook only for students of Harvard University. After some expansion steps, however, the social network today has more than 300 million members. Zuckerberg explained to Stern, a German news magazine, that it is his goal to gain one billion Facebook users. In Germany, also according to Stern, three-fourths of the 40 million internet users are already members of an online network, and this number is rising. But not only private networks are booming, also in business online networking is growing in popularity such as the business internet portal XING. But futurologists forecast much more: The personal presence on location will not be necessary any more. Research clusters can join their forces in networks. They can study in the same fields of research without being in the same laboratory. Nike picked up this trend: At the Nike+ 10km Human Race the runners don’t have to be present at any of the 30 race venues. Entrants only need a sensor and the corresponding software and with this, they can do their races by themselves at home. Afterwards they synchronize their data via the network. The Nike+ Community has grown to 1.2 million members from 142 countries at the Human Race in 2008.
But the topic of networks does also play an important role for the industry, e.g., to profit from results of the latest research or to educate employees. To push such networks between industry and academia, first and foremost platform- independent solutions and standardized interfaces are essential. The importance of standards is something the machine vision industry recognized early on, and consequently introduced the GigE Vision Standard. At the last Vision show, the three big associations, Automated Imaging Association (AIA), European Machine Vision Association (EMVA) and Japan Industrial Imaging Association (JIIA), entered into an agreement of cooperation for the common development and promotion of new standards in machine vision.
If you also know about the importance of networking: Become a member of our INSPECT network to share existing knowledge over thousands of kilometers. Our goal is one billion users as well – help us in attaining this!
Stephanie Nickl
Editor INSPECT
Leave a Comment » | Viewpoint | Tagged: AIA, Bill Gates, business portal, EMVA, Facebook, Forbes, Forbes 400, Harvard University, INSPECT, inspect network, JIIA, Machine vision, Marc Zuckerberg, networking, Nike, Nike+ 10km Human Race, Nike+ Community, online network, social networks, Stern, Waren Buffet, XING | Permalink
Posted by stephanienickl
October 6, 2009
88 pages. That was the size of the September issue of the INSPECT last year. About one third more pages than offered by the September issue of 2009. You surely already noticed that trade journals are significantly thinner this year and that they show a frightening tendency towards anorexia the further the year progresses. Why is that so anyway?
A trade journal is a product, as much as a consumer magazine is, or a book. This product needs to generate an income. That is exactly the same as it is with the products produced by your own company. For a trade journal the main source of income is advertisement, placed by companies who have an interest to communicate with you, the reader of the journal. The amount of advertisement continuously decreases since the beginning of this year and subsequently the income of trade journals abates. Now, one could argue splendidly if it is wise and well to save on market communication especially in economical difficult times, or if it were not even more important now to show a high visibility. On the other hand, one may not be mistaken that for many a company it is no longer a choice where to save.
As a consequence, cost saving has to be done by the publisher of trade journals as well. The first publishing houses announce significant economical imbalance and fight for survival. Others meet the market situation with magazines that rather remind you of a student´s notebook in size and haptics.
Not only in light of this comparison, the 54 pages of the September INSPECT are really good.
Is there no need to save costs for INSPECT as well, you might ask yourself now.
Yes of course there is, but we are lucky to have a very sound basis in more than one aspect: The companies that place their ads in the INSPECT know that in doing so they reach their customers of today and of tomorrow in an optimal way and our readers confirm for them that this choice is the right choice.
Take a close look at the advertisements on the 54 pages of INSPECT 8-9: for those companies it is a priority to be noticed by our readers and to communicate with them. This also shows economical strength, strategic sustainability and faith in their own future. Suddenly these ads have a whole new meaning in addition to featuring a product.
For us they provide the possibility to present with each issue a versatile, comprehensive and independent information package. In German and in English language. In each issue. This is complemented with our online presentation at www.inspect-online.com, taking up the topics from the printed issues and enriching them with up-to-date news on a daily basis, again in German and English language. During the summer our portal was given a facelift, that is – as with cars – a technical and optical makeover. Especially the interactive and the multimedia aspects, naturally rather out of reach for a print product, are offered by the website: search engines, webcasts, Buyers Guide database, job search, online polls, to mention but a few. But not only that: also the printed edition features some new components with which we hope to generate value and deliver delight.
Gabriele Jansen
Publishing Director INSPECT
Leave a Comment » | Viewpoint | Tagged: Automation, Gabriele Jansen, GigE Vision, Image processing industry, INSPECT, Inspect magazine, Machine vision, speed camera, trade journal, Vision | Permalink
Posted by gabrielejansen
February 13, 2009
Financial crisis, recession, economic uncertainty – the consequence: lay-offs. Is that the necessary, sensible, businesswise responsible decision?
Daimler, Opel, Arcelor, SAP, but also Google and Microsoft lay off their employees. For the United States the biggest reduction of jobs since 1945 is already forecasted.
Costs need to be cut in difficult times, the belt needs to be tightened. The company as a whole needs to be protected, last but not least in the interest of the majority of employees (which were not let go). This is the usual and also the ethical correct argumentation. But is it economically sound? Is the short-term benefit really bigger than the potential damage?
Reducing costs, shedding cushions accumulated in fat years, making the company lean and agile, is not a bad idea, generally speaking. It might have been more clever, though, to accomplish that already during the good times and thus be better armed for the upcoming difficult months. But: Better late than never!, as the saying goes. Now it is up to the smart company leader to decide where the dispensable costs are located.
In our companies from the „developed countries” the block of labor cost ranges very highly in the cost categories. That makes cost cutting here so attractive. However, one of the reasons for this is the fact that our people are so highly qualified. They bring exactly the skill set to the table that is not only required for their demanding tasks – all other tasks are long since outsourced anyway -, but that was build up and financed heavily by the companies themselves. All the investments in these so called human resources – intensive recruiting, tedious selection processes, company internal training, additional education, specialization – are lost with the lay-off. As well as the know how of the people about the products, markets, competition, internal processes of their company. That is first and foremost a bleeding. Bloodletting was common practice in the middle-ages and was prescribed almost always no matter what the ailment was, but today we know that this lead more often than not to the early demise of the patient instead of his recovery. This is the danger that also the company faces when reacting to experienced or expected difficulties foremost with lay-offs and thus with decimation of their own strength.
A diet for the company can be reasonable, with love-handles too prominent fast movements are becoming difficult. But “lean” must not turn into anorexia. To hold one´s ground, not only but especially in times of crisis, requires strength. Strength in innovation capability to bind the customers to the company by better, not cheaper, products and services. Strength not to lose sight of the long-term strategic goals and thus stay a reliable partner for the customers. Strength to develop new markets, products and sales channels, i.e. to conquer the recession in the old markets with investment into new ones. Investment into the future in addition to coping with the not so easy presence is only possible with qualified and motivated people on board. A team that is spread too thin is lacking both, power and creativity.
BTW future. All current doomsaying put aside: the recession ultimately will end, there will be a rebound. First signs for this rebound are expected by the experts around mid 2009. In most European countries, with the respective labour laws, this will be about the time when the employees given notice today will actually leave the company. The necessary resources then required, will need to be searched for, found and trained and it will take quite some time before they can be as proficient as the experienced staff from the past.
Would it not be better to rise with the economic upturn with innovations, improved products and processes and motivated people on board, empowered by their own company?
This, in any case, is my point of view.
Leave a Comment » | Automation, Image processing, Imaging, Machine vision, Opinionated, Viewpoint, Vision, Vision Business, Vision Marketing, Vision Markets | Tagged: bloodletting, cost cutting, cost reduction, crisis, global business, human resources, INSPECT, labor cost, lay-off, Machine vision, market place, recession | Permalink
Posted by gabrielejansen
December 3, 2008
One of the trend topics during the recent Vision trade show in Stuttgart has been standardization. Boring, yawn, unsexy – one might think. But wait a second ! Standardization of the main parts of a machine vision system, is just the opposite: a highly attractive topic. And this is so for all parties involved. Customers and users of machine vision profit by standards due to the increased transparency of the decision relevant criteria, the improved possibility to integrate different modules with each other, the avoidance of interface problems and the resulting cost eficiency as well as significantly higher security of their investments. The supplier of the machine vision product gains from the subsequent increase of the product´s usage, owing to the fact that technical and economical barriers on the user side are reduced. It is also to their benefit, of course, that at least for the standardized aspects of their product range they do not have to re-invent the wheel over and over again and thus can direct their development resources to areas where significant competetive advantages can be won.
Before either one of both sides can leverage these advantages, however, much time, effort and a good measure of enthusiasm has to be invested. A successful industry standard naturally requires that the technical details are worked out by the industry itself and that the result is accepted and put into action by at least the major part of this industry. For Machine Vision, this work is executed today in standardization working groups surpassing the barriers of companies, countries and languages, supported by the three major Machine Vision associations: EMVA; AIA and JIIA. The current status of the standards has been presented during the Vision trade show with lectures as part of the Industrial Vision Days but also at the special exhibition „Vision Standards“. Organized by the EMVA and the trade show all three associations presented here the standards they host: GigE Vision, CameraLink, GenICam, EMVA 1288 and Lens Mount. This exhibition has been highly informative, well presented – one could even say sexy.
Leave a Comment » | Image processing, Machine vision, Opinionated, Standardization, Uncategorized, Vision, Vision Business, Vision Markets | Tagged: Add new tag, AIA, CameraLink, EMVA, EMVA 1288, exhibition, GenICam, GigE Vision, Image processing, industry standard, INSPECT, JIIA, Lens Mount, Machine vision, Standardization, trade show, Vision | Permalink
Posted by gabrielejansen
October 2, 2008
Machine vision is generally understood as image processing for industrial applications, as opposed to the so-called non-industrial applications of for example medicine, surveillance, traffic, entertainment, to name only a few. However, also these areas are in fact industries, only not production oriented ones. And the term Machine Vision could also be understood as “machines that see”, whatever they see in whichever industry or application as long as it is an automated process. This broadening of a definition would directly lead to a huge broadening of what is today considered the Machine Vision Market and a large group of additional players could be suddenly seen on the field.
Is this useful or not ? For a trade journal ? For an association ?
Let´s face the question by taking a closer look into these other areas of application for the technologies we usually cover with INSPECT (www.inspect-online.com).
The INSPECT magazine 03/08 is focused on a wide range of different applications beyond production. Besides the target of generating profit quite a few of these applications directly or indirectly provide for a safer world, a cleaner environment or improved medical treatment. The combination of fast 3D stereo tracking in combination with tissue simulation in virtual reality for example allows for the first time ever to practice eye surgery until proficiency is reached like pilots practice mastering the airplane before their first real take-off. With the increase of age-related eye problems if only by the shift in the age pyramid, millions of us will be very happy about this in the future.
A totally different and yet machine vision empowered tool to make our world a safer place is the equally respected and loathed speed control. Speed measurement, number plate recognition and driver face capturing are all optical and machine vision tasks. As much as these curbside boxes cost us frequent drivers and as much as we might curse it for again getting us in the one moment of lowered attention, I think we still agree that thousands of lives are saved because of the presence of these speed cameras.
Recycling is one way to get our energy balance back on track and glass recycling yields especially high potential. Did you know that with each ton of recycled glass the emission of greenhouse gasses is reduced by 200 kilograms ? This, however, is only made possible by very fast and highly accurate optical sorting of the secondary raw material.
These and many more equally important equally interesting applications are covered with the magazine. Among them also the meanwhile famous Stasi (i.e. Ministry for State Security, German Democratic Republic) puzzle, the vision empowered reconstruction of 45 Million torn or shredded Stasi documents. A topic very intertwined with our country´s recent history, yet not as German as one could think at first glance.
So coming back to the question: does the definition of Machine Vision need to be extended? Why don´t you share your thoughts on this and other “vision related” matters with other experts either here or in our newly established INSPECT community at http://network.inspect-online.com.
Looking forward to meet you there,
Gabriele Jansen
Leave a Comment » | Image processing, Machine vision, Opinionated, Vision, Vision Business, Vision Marketing, Vision Markets | Tagged: 3D, Automation, entertainment, eye surgery, flight simulation, Gabriele Jansen, Image processing, INSPECT, Inspect community, Inspect magazine, Machine vision, medicine, Ministry for State Security, number plate recognition, optical sorting, recycled glass, recycling, speed camera, speed control, speed measurement, Stasi, Stasi documents, stereo tracking, surveillance, tissue simulation, trade journal, traffic control, virtual reality | Permalink
Posted by gabrielejansen
August 20, 2008
Just imagine the possibilities: doing business globally without having to travel at all. No more wasting of hours getting to your destination, no more “you are selected for special screening” harassment on US airports, no more bad air, bad food and cramped legs with 14 hours hops to Asia, no more traffic jams, no more missed connections, …. Instead only warm and comfy sitting in front of your notebook, a cup of coffee next to you and the worlds biggest market place just one keystroke away.
Today you can already virtually test-drive your new Beemer or buy a pair of sport shoes (virtual and real) in Second Life. Maybe tomorrow you will be able to visit a trade show there. The products will be shown in 3D animation, including all the technical specs and the pricing that applies to your company. The salesperson has enough time for all your questions and enough expertise to answer them as well. There is no need to walk endless halls to get to the couple of vendors you want to see, there is also no need for stale coffee and standardized trade show cookies to get you through the day. In minimal time you are perfectly informed about the new products of your vendors, about some interesting new players on the market and you chatted amicably with your favourite suppliers as well as with a couple of business partners also visiting the show. – That is your avatar chatted with their avatar, which is even better since you did not shave this morning.
Nice scenario, very effective, very cost saving for your company, might be even healthy for yourself, compared.
For the vendor: even better. Just imagine being able to be present at virtually all interesting trade shows worldwide, without the hassle of shipping material and people all over the world, building costly booths and getting your equipment running without electricity in – say – Mumbai. Your products are represented always in the new version, information updated immediately, your sales force reaches spectacular peaks of efficiency and after you had issued the companywide rules of conduct for your employees in the Internet, your CI is transported flawlessly.
It is remarkable anyway how much, in general, the avatar today resembles the actual person as opposed to being some sort of fantasy superhuman. Admittedly, there might be a tad fuller hair or a wee bit less tummy, but all in all there is a tendency to design the electronic image as a match for the physical appearance of its owner. This shows that the virtual reality is on a clear path to being used as a means of transportation more than as a fantasy game place. Still short of “Beam me up, Scotty”, there is no faster way to travel than the Internet. Maybe Second Life in its form today is not yet the pinnacle of an electronic market place ready for capital goods, but the need is clearly there. This is also very visible with the increasing popularity of Internet business networks (did you know that there is an INSPECT community at http://network.inspect-online.com/ ?).
So are we already on the verge of a new way to do business or is the physical personal contact irreplaceable in the foreseeable future ?
Gabriele Jansen
Leave a Comment » | Opinionated, Vision Business, Vision Marketing, Vision Markets | Tagged: avatar, business network, global business, Image processing, INSPECT, Machine vision, market place, optical metrology, optics, social network, trade show, virtual reality, Vision | Permalink
Posted by gabrielejansen
